STANDARD MULTIPURPOSE LIQUID SOAP PRODUCTION*

*STANDARD MULTIPURPOSE LIQUID SOAP PRODUCTION*
*INGREDIENTS*
(1)Nitrosol 1milkcup
(2)Soda ash2 milk cup (3)caustic soda 2 spoons
(4) Sls1 milk cup
(5) STP1 milk cup
(6) Booster1/2 litre (7)Texapon1 milk cup
(8)Cocomite2spoons
(9)Sulphonic litre
(10) Industrial salt 1 spoon
(11) Colouring
(12)Perfume.

*PROCEDURE*
How To Mix:
(1)Get abig basin.
(2) 1litre cup, 5 litre bucket, 1 turning stick.
(3) Put 5 litres of water inside the basin
(4) Then put 1litre of water inside the bucket, add your nitrosol, stir it and pour inside the big basin.
(5) put the soda ash and the caustic soda together in the bucket and add 1 litre of water, stir together and pour it in the big basin, stir it up with the nitrosol that is already there.
(6) again put 1 little of water in the bucket and add SLS, stir it n pour it the mixture n stir together.
(7) pour 1 litre of water in the bucket and add STP stir it and add it to your mixture and stir very well.
(8) put the booster directly into your mixture and stir very well.
(9) add 2 litres of water into the bucket n put in the Texapon, Cocomite2spoons, Sulpurnic,stir the 3 together and add it to your mixture. This time around you have to stir very well to achieve a blend result, stir for like 3 minutes, then add the industrial salt and colour (as you desire)
Allow the mixture to rest for like 1 hour then add your perfume and check the thickness if it is too tick then add up water. Pack as you desire. At least you should be able to to get 35 litres of liquid soap with the above mixture.

You can get all ingredients from shops where they sell chemicals or from organic sellers.